Weekly blog: a new post every Tuesday. Don’t forget to sign up for our free weekly newsletter on Substack: sign up here.Our four sites each post once a week: West Lethbridge Weather on Monday, Lethbridge Weather on Tuesday, VE6DOK on Wednesday and Dok-Tor Harddrive on Thursday, with the Prairie Signals newsletter rounding up the week on Friday.
Plugging in is part of winter here, but most people leave the block heater on far longer than they need to.
When to plug in
- Most engines start easier with the block heater from about −15 °C (5 °F) and colder. Many manufacturers recommend it.
- Diesel engines benefit from plugging in at warmer temperatures, often around −10 °C (14 °F).
- In a strong cold snap, plug in every night.
How long
- Two to four hours before you leave is enough for most vehicles. After that, the engine doesn’t get much warmer, it just uses more power.
- An outdoor-rated timer is cheap and pays for itself. Set it to come on three hours before you leave.
Check the cord
- Look for cracks, exposed wire or a loose plug, especially after the first cold weeks of the season. A damaged cord is a fire and shock risk.
- Use a proper outdoor-rated extension cord, as short as possible, and don’t run it through a closed door or window where it can be pinched.
- Unplug before you drive away. Everyone does it once. A bit of slack and a bright cord helps you notice.
Other cold-start helpers
- Keep the gas tank at least half full in winter.
- A battery more than four or five years old may not survive a cold snap. Have it tested in the fall.
- A battery blanket or trickle charger helps if the vehicle sits for days.
See our Planning Around the Weather page for the full winter driving list.
Was this page helpful?
Questions or ideas about this post? Email us at help@drhd.com. We read every one.